Add Network Camera on Dierent Network Segment
If your network camera is on a dierent network segment, the device can search its IP address
within a range of IP addresses, and add it.
Before You Start
●
Ensure the network connecon is valid and correct.
●
Ensure the network camera password is the same as your video recorder.
Steps
1.
Go to Conguraon → Camera → Camera → IP Channel .
2.
Click Advanced Search.
3.
Enter Network Segment.
Figure 6-9 Enter Network Segment
4.
Click Add.
Add Network Camera Through Plug-and-Play
If an inacve network camera or third party ONVIF camera is connected to your network, the video
recorder may
automacally detect and add the camera, or nofy you to manually add it.
Steps
1.
Go to Conguraon → Camera → Camera → IP Channel .
2.
Click More.
3.
Select Plug-and-Play.
4.
Oponal: Enable Auto Add Network Camera. The video recorder would automacally detect
and add the
inacve network camera or third party ONVIF camera.
Figure 6-10 Auto Add Network Camera
Network Video Recorder User Manual
52
To Next Page
Loading...
Need help?
General
Weight and Dimensions
