Chapter 1 Startup
1.1 Acvate Your Device
For the rst-me access, you need to acvate the video recorder by seng an admin password. No
operaon is allowed before acvaon. You can also acvate the video recorder via web browser,
SADP or client soware.
Before You Start
Power on your device.
Steps
1.
Select a language.
2.
Click Apply.
3.
Set the
resoluon as 1920*1080/60Hz (1080P) as needed.
Note
●
The resoluon is 1280*720/60Hz (720P) by default. If you check Do not show this prompt
again., the prompt will not appear again aer reboong.
●
Aer the device is connected to the monitor with HDMI cable, the resoluon will be
automacally adjusted to 1920*1080/60Hz (1080P). Some monitor models do not support
resoluon adaptaon.
4.
Input the same password in Password and Conrm Password.
Figure 1-1 Acvaon
Network Video Recorder User Manual
1