EasyManuals Logo
Home>HIKVISION>Network Hardware>DS-7608NXI-K2

HIKVISION DS-7608NXI-K2 User Manual

HIKVISION DS-7608NXI-K2
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
Congure Advanced Camera Parameters
You can congure advanced camera parameters like camera IP address, camera password, etc.
Before You Start
Ensure your network camera is on the same network segment with your video recorder.
Ensure the network
connecon is valid and correct.
Steps
1.
Go to Conguraon → Camera → Camera .
2.
Click
.
3.
Set camera parameters like IP address, camera password, etc.
4.
Click Apply.
Import/Export IP Camera
Conguraon File
The informaon of added network camera can be generated into an excel le and exported to the
local device for backup, including the IP address, port, password of admin, etc. And the exported
le can be edited on your computer, like adding or deleng the content, and copy the seng to
other devices by
imporng the excel le to it.
Before You Start
Connect a backup device, such as a USB ash drive, to your video recorder.
Steps
1.
Go to Conguraon → Camera → Camera .
2.
Click More.
3.
Click Export/Import to export/import
conguraon les to the connected backup device.
4.
Set the storage device and folder path.
5.
Click Export/Import.
What to do next
Aer the imporng process is completed, you must restart the video recorder.
Advanced
Sengs
Steps
1.
Go to
Conguraon → Camera → Camera .
2.
Click More.
3.
Congure the parameters as your desire.
H.265 Auto Switch Conguraon
If you enable the opon, the device will automacally switch to H.265 stream for the network
camera (which supports H.265 video format) for the
inial access.
Network Video Recorder User Manual
56

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7608NXI-K2 and is the answer not in the manual?

HIKVISION DS-7608NXI-K2 Specifications

General IconGeneral
Product colorBlack
Rack capacity1U
Rack mountingYes
Input bandwidth80 Mbit/s
Output bandwidth160 Mbit/s
Maximum frame rate30 fps
Maximum resolution3840 x 2160 pixels
Alarm input channels4
Video input channels8 channels
Alarm output channels1
Supported resolutions12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Audio formats supportedG.711 A-law, G.711 μ-law, G.722, AAC, G.726
Video formats supportedH.264, H.264+, H.265, H.265+
Wi-FiNo
HDD capacity10000 GB
HDD interfaceSATA
Maximum storage capacity20 TB
Number of HDDs installed0
Number of HDDs supported2
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 1000, 100 Mbit/s
Ethernet LAN (RJ-45) ports9
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS
Power over Ethernet (PoE) ports quantity8
Output current2.5 A
Output voltage48 V
Power consumption (typical)15 W
Total Power over Ethernet (PoE) budget80 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Sustainability certificatesFederal Communications Commission (FCC), CE
Weight and Dimensions IconWeight and Dimensions
Depth315 mm
Width385 mm
Height52 mm
Weight3000 g

Related product manuals