HIKVISION DS-7608NXI-K2 User Manual

Quick Add Switch
Quick add switch(es) in the same network segment with the video recorder. If the switch is not
acvated, it will be added with the camera acvaon password.
Steps
1.
Go to Conguraon → Device Management → Switch.
2.
In the Online Device List, check the switch(es) to be added and click Add to add switch(es) in the
same network segment with the video recorder using the camera
acvaon password.
Add Switch Manually
Steps
1.
Go to
Conguraon → Device Access → Switch .
2.
In the Added Device List, click Add and set the parameters of the device.
Table 6-1 Device Parameter Descripon
Parameter Descripon
IP Address The IP address of the switch.
Management Port It is recommended to keep the default conguraon.
User Name / Password The user name / password of the switch.
Use the Camera Acvaon
Password
Use the Camera Acvaon password of the video recorder to add
the switch.
3.
Click Add and Connue and repeat operaon unl all devices have been added.
4.
Click Add.
6.4.2 IP Speaker
Add and manage IP speaker. IP speaker can be linked to a camera to realize sound alarm linkage
and two-way audio.
Quick Add IP Speaker
Quick add IP speakers in the same network segment with the video recorder. If the IP speaker is
not acvated, it will be added with the camera acvaon password.
Steps
1.
Go to Conguraon → Device Access → IP Speaker .
2.
In the Online Device List, check the IP speaker(s) to be added and click Add to add IP speaker(s)
in the same network segment with the video recorder using the camera
acvaon password.
Network Video Recorder User Manual
60

HIKVISION DS-7608NXI-K2 Specifications

General

Product color	Black
Rack capacity	1U
Rack mounting	Yes
Input bandwidth	80 Mbit/s
Output bandwidth	160 Mbit/s
Maximum frame rate	30 fps
Maximum resolution	3840 x 2160 pixels
Alarm input channels	4
Video input channels	8 channels
Alarm output channels	1
Supported resolutions	12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Audio formats supported	G.711 A-law, G.711 μ-law, G.722, AAC, G.726
Video formats supported	H.264, H.264+, H.265, H.265+
Wi-Fi	No
HDD capacity	10000 GB
HDD interface	SATA
Maximum storage capacity	20 TB
Number of HDDs installed	0
Number of HDDs supported	2
Networking standards	IEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates	10, 1000, 100 Mbit/s
Ethernet LAN (RJ-45) ports	9
Supported network protocols	TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS
Power over Ethernet (PoE) ports quantity	8
Output current	2.5 A
Output voltage	48 V
Power consumption (typical)	15 W
Total Power over Ethernet (PoE) budget	80 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	Federal Communications Commission (FCC), CE

Weight and Dimensions

Depth	315 mm
Width	385 mm
Height	52 mm
Weight	3000 g