5.
ClickSave.
Audio Alarm Output
When light and audio alarm camera is connected, you can set the parameters and arming schedule
of the audio alarm.
Before You Start
Light and audio alarm camera is connected.
Steps
1.
Go to
Conguraon → Event → Normal Event → Flashing Light Alarm Output.
2.
Click for any row.
3.
Select the Audio Type as Alarm Sound, Prompt Sound, or Custom Audio.
Note
●
When you select the Alarm Sound, you also need to select the alarm sound type.
●
When you select the Alarm Sound, you also need to upload the custom audio, enter the audio
name and select the uploaded audio in the drop-down box of Custom Audio.
4.
Set the Alarm Times and Sound Volume.
5.
Set the arming schedule. Refer to Congure Arming Schedule for details.
6.
ClickSave.
Excepon
Excepon events can be congured to take the event hint in the live view window and trigger
alarm outputs and linkage
acons.
Steps
1.
Go to
Conguraon → Event → Normal Event → Excepon .
2.
Congure event hint. When the set events occur, you will receive hints in alarm center.
1) Enable Event Hint.
2) Select events to hint. Choose from:
●
Click
of Event Hint Conguraon to select events.
●
Click in the upper-right corner of local menu to enter alarm center to select events.
3.
Select
Excepon Type to set its linkage acons.
Network Video Recorder User Manual
67
To Next Page
Loading...
Need help?
General
Weight and Dimensions
