Version 1.1, 09/2020. Copyright 2012 Hitron Technologies
101
Version 1.1, 09/2020. Copyright 2020 Hitron Technologies
101
Hitron CODA-551x User’s Guide
The following table describes the labels in this screen.
6.7 The Admin: Device Reset Screen
Use this screen to reboot your CODA-551x, or to return it to its factory default
settings.
Click Admin > Device Reset. The following screen displays.
Table 33: The Admin: USB Storage Screen
Shared Status This displays whether USB sharing is active or inactive.
Select Enabled to turn USB sharing on. USB
devices connected to the CODA-551x will be
accessible on the network.
Select Disabled to turn USB sharing off. USB
devices connected to the CODA-551x will not be
accessible on the network.
No. This displays the index number of the connected USB
device.
When no USB device is connected, no number displays.
Disk This displays the name of the connected USB device,
by which it may be accessed on the network.
Action Click Eject before physically removing a connected
USB device from the CODA-551x, in order to ensure all
operations are correctly terminated and no data loss
occurs.
Save Changes Click this to save your changes to the fields in this
screen.
Refresh Click this to refresh the data in this screen.
Help Click this to see information about the fields in this
screen.