Version 1.1, 09/2020. Copyright 2012 Hitron Technologies
93
Version 1.1, 09/2020. Copyright 2020 Hitron Technologies
93
Hitron CODA-551x User’s Guide
5.4 The Advanced Wireless settings Screen
Status This displays whether or not the connected device is
active.
Action Click Manage to make changes to the device’s filtering
status; see Adding or Editing a Managed Device on
page 112 for information on the screen that displays.
Managed Wireless Clients
Block Rules Use these buttons to control the action to be taken for
the devices listed:
Select Allow All to ignore the Managed Devices
list and let all devices connect to the CODA-551x.
Select Allow Listed to permit only devices you
added to the Managed Devices list to access the
CODA-551x and the network. All other devices are
denied access.
Select Block Listed to permit all devices except
those you added to the Managed Devices list to
access the CODA-551x and the network. The
specified devices are denied access.
Host Name This displays the name of each network device in the
list.
MAC Address This displays the Media Access Control (MAC) address
of each network device in the list.
Action Click Remove to remove a managed device rule from
the list.
Save Changes Click this to save your changes to the fields in this
screen.
Add Managed Device Click this to add a new managed device rule (see
Adding or Editing a Managed Device on page 112).
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 27: The Wireless: Access Control Screen (continued)
To Next Page
Loading...
Need help?
General
