Version 1.1, 09/2020. Copyright 2012 Hitron Technologies
107
Version 1.1, 09/2020. Copyright 2020 Hitron Technologies
107
Hitron CODA-551x User’s Guide
Figure 46: The Security: IPv6 Inbound Firewall Screen
The following table describes the labels in this screen.
Table 36: The Security: Port Blocking Screen
Firewall Use this field to turn IPv6 Inbound Firewall on or off.
Select Enabled to turn IPv6 Inbound Firewall on.
Select Disabled to turn IPv6 Inbound Firewall off.
Ping on WAN
Interface
Use this field to permit or prohibit Internet Control
Message Protocol (ICMP) echo requests on the WAN
interface.
Select Allow to permit pinging on the WAN
Interface.
Select Deny to prohibit pinging on the WAN
Interface. Echo requests to the WAN Interface are
silently ignored.
IPv6 Inbound Firewall Rules
Add Rule Click Add Rule to add an IPv6 Inbound Firewall Rule.
Add a rule for IPv6 Inbound Firewall
Common Application Use this field to select the application for which you want
to create a port forwarding rule, if desired
Application Name This displays the name you assigned to the blocking
rule when you created it.
To Next Page
Loading...
Need help?
General
