Version 1.1, 09/2020. Copyright 2012 Hitron Technologies
112
Version 1.1, 09/2020. Copyright 2020 Hitron Technologies
112
Hitron CODA-551x User’s Guide
7.3.2 Adding or Editing a Port Blocking Trusted Device
Rule
To add a new trusted device rule, click Add Trusted PC in the Security > Port
Blocking screen.
To edit an existing trusted device rule, locate the rule in the Security > Port
Blocking screen and click its Manage button.
The following screen displays.
Figure 49: The Security: Port Blocking Trusted Device Add/Edit Screen
The following table describes the labels in this screen.
Apply Click this to save your changes to the fields in this
screen.
Close Click this to return to the Port Blocking screen without
saving your changes to the rule.
Table 38: The Security: Port Blocking Trusted Device Add/Edit Screen
Host Name Enter a name to identify the device.
IP Address Enter the local IP address of the device.
Rule Status Use this field to define whether the trusted device rule
should be active or not.
Select Enabled to activate the trusted device rule.
Select Disabled to deactivate the trusted device
rule.
Table 37: The Security: Port Blocking Add/Edit Screen
To Next Page
Loading...
Need help?
General
