Honda CRF450X 2010 User Manual

LUBRICATION SYSTEM
Ahar installing 8
snap ring, a/ways
rotate it in its
groove /0 be sure it
IS fully seated.
OIL JET
5-6
Check the pressure relief valve for damage or clogs.
Remove the O-ring from the pressure relief valve.
INSTALLATION
Apply oil to a new O-ring and install it onto the
pressure relief valve.
Install the pressure re l ief valve into the left
crankcase cover.
Install the snap ring securely.
Install the l eft crankcase cover (page 12-6 ).
REMOVAL/INSPECTION
Separate the left and right crankcase halves (page ,..~~~'O:
13-10).
Remove the bolt and oil jet from the left crankcase.
Check the left crankcase oil passage for clogg ing.
Clean the oil passage.
Check the oil jet for damage or clogging.
Blow the oil passage in the oil jet wi th compressed
air.
OIL JET
•
•

Honda CRF450X 2010 Specifications

General

Brand	Honda
Model	CRF450X 2010
Category	Motorcycle
Language	English