Honda CRF450X 2010 User Manual

FRONT WHEEL/SUSPENSION/STEERING
14-50
Temporarily install the stem nut to avoid damaging
the stee ring stem threads.
Remove the lower tapered roller bearing and dust
seal from the steering stem.
Apply urea based mUlti-purpose grease with
extreme pressure to the dust seal lips.
Install
a new dust seal.
Install
the lower bearing using a hydraulic press and
the special
tool as shown.
TOOL:
Att ac hm e nt , 30 mm 1.0 .
INSTALLATION
NOTE :
07746-0030300
• Use water resistant grease #2 (urea based multi-
purpose grease) for the steering bearings and
dust seals:
- Excelite EP2 (Kyodo Yushi)
- Stamina EP2 (Shell) or equivalent
Pack the upper and lower tapered roller bearings
with grease.
Apply grease to all of the bearing surfaces.
Install the uppe r tapered roller bearing in the steer-
ing head.
'05 - '07 sh own:
LOWER BEARING
'05 - '07 shown:
DUST SEAL ------:
UPPER BEARING
Slide the steering stem into the steering head from
the bottom. *~
Install the upper dust seal. LOWER BEARIN;[ ~ i:::
ST"ER II NG STEM
•

Honda CRF450X 2010 Specifications

General

Brand	Honda
Model	CRF450X 2010
Category	Motorcycle
Language	English