Honda CRF450X 2010 User Manual

l
Install the washer and coliar with their "OUT-SIDE"
ma r ks facing out.
Tighten the
drive sprocket bolt to the specified
torque.
TORQUE: 31 N'm (3.2 kgf ·m, 23 Ibf.ft )
Install the spacer, sproc k et cover and tighten the
bolts securely.
Adjust drive chain slack (page 4-24).
ENGINE REMOVAL
Drain the engine oil (page 4-20).
Drain the transmission oil (page 4-23),
Drain
the coolant (page 7-7).
Remove the following:
- Seat (page 3-3)
left/ righ t/center engine guards (page 3-5)
Fuel tank (page 3-8)
Spark pl ug cap (page 4-12)
Ignition coi l (page 18-8)
Exhaust system (page 3-13)
Carburetor (page 6-1 1)
Drive sprocket (page 8-4)
Kickstarter pedal (page 11 - 5)
Gearshift pedal (page 1' -24)
Brake pedal (page 16-24)
Radiator reserve tank (page 7-9)
'05 and '06 Remove the PAIR control va l ve (page 6-30).
California type, Disconnect the breather hoses,
Aft er '06;
Remove the bolt and ground cable.
Remove the nut and starter motor cable.
Remove the bolt and clutch cable stay, then discon -
nect
the cl ut ch cable from the clutch lifter lever.
ENGINE REMOVAl/INSTALLATION
8-5

Honda CRF450X 2010 Specifications

General

Brand	Honda
Model	CRF450X 2010
Category	Motorcycle
Language	English