Honda CRF450X 2010 User Manual

ALTERNATOR
Remove the woodruff key.
INSTALLATION
Wipe any oil off the mating surface of the flywheel .
Install the woodruff key into the crankshaft groove.
Install the flywheel to the crankshaft by aligning the ~;;;;~
groove in the flywheel with the woodruff key.
Apply oil to the flywheel nut threads and seating
surfac e.
Install the washer and nut.
Hold the flywheel with th e special tool and tighten
the nut to the specified torque.
TOOL :
Flywheel holder 07725·0040001 or
07AMB ·KRNA100
TORQUE:
64 N'm (6 .5 kgf·m, 47 IbUt )
Install the left crankcase cover (page 12-6),
LEFT CRANKCASE COVER
INSTALLATION
12-6
Install a new gasket and dowel pins.
Apply oil to the engine oil drain bolt threads and ' ~~~~;~ ~~E~~i i~ii~~~
seating surface.
Install the left crankcase cover and bolts .
Tighten the left crankcase cover bolts in the order as
shown in the illustration.
• First tighten the No .1 bolt temporarily.
• Tighten the No.2 - No .9 bolts securely.
•
Tighten the engine oil drain bolt (No.10) to the
specified t orque with a new sealing washer .
TORQUE: 16 N'm
{1.6 kgf ·m, 12 Ibf · ftj

Honda CRF450X 2010 Specifications

General

Brand	Honda
Model	CRF450X 2010
Category	Motorcycle
Language	English