Honda CRF450X 2010 User Manual

FRONT WHEEL/SUSPENSION/STEERING
Set the slider on V-blocks and measure the runout .
Turn
the slider and measure the runout using a dial
indicator.
Actual runout is 112 of the total indicator reading.
SERVICE LIMIT : 0.20 mm 10 .008 in)
Do not reuse the Replace if the service limit is exceeded, or the re are
slider if it is bent. scratches or nicks that will allow fork oil to leak past
the seals.
14-20
FORK SPRING
Measure the fork spring free length by placing it on
a
flat surface.
SERVICE LIMIT : 493 mm (19.4 in)
BUSHING/BACK-UP RING
Check the bushing for excessive wear or scratches.
If copper appears on the s urf ace, replace the bush-
ing.
Replace the back-up ring if there is distortion at the
points shown.
Remove any metal powde r from the slider and
guide bushings with a n ylon brush and fork oil.
FORK DAMPER
Check the fo rk dampe r for be nd s or damage.
Check the fork damper piston rod for bends, wear or
damage .
Check the fork damp er oper atio n by pumpi ng the
piston rod.
If the operation is not smoot h, fill the fork damper
with fork oi l and check the fork damper operation
again (page 14-25).
'05 - '07 shown:
SLIDER
BUSHC
G
r K\
", .
)~
I
-J
0
\
BACK-U\P RING
-
'05 - '07 shown:
DAMPER

Honda CRF450X 2010 Specifications

General

Brand	Honda
Model	CRF450X 2010
Category	Motorcycle
Language	English