Honda CRF450X 2010 User Manual

CYLINDER HEADIVALVES
CYLINDER HEAD REMOVAL
Remove the following:
- Ignition coil (page 18-8)
- Exhaust pipe (page 3- 1 3)
- Carbur etor (page 6-1 1)
- Camshaft holder assembly ('05 - '07: page 9· 8,
After '07: page 9-1 6)
- Spark plug (page 4-12)
'05 and '06 Remove the PAIR control valve (page 6-30),
california type. Drain the coolant (page 7-7),
After ' 06 :
Be careful not to let Remove the shims.
the shims fall into •
The s him s ca n be easily removed wit h tweezers
the cylinder.
9-24
or a magnet .
• Mark all val ve sh ims so they can be installed in
their origi nal position.
Remove the upper engine moun t ing nut , bolt and ir:' ~~ '1":'
fuel hose clamp. 010';;;;;;;;;';';';;:;;;;' ;;; ;;';"
Remove the bolts, clut ch cable guide and engine
hanger plates.
Loosen the hose band screw and disconnect the
upper radiator hose.
•
•
•

Honda CRF450X 2010 Specifications

General

Brand	Honda
Model	CRF450X 2010
Category	Motorcycle
Language	English