Honda CRF450X 2010 User Manual

"---.
CLUTCH/STARTER CLUTCH/KICKSTARTER/GEARSHIFT LINKAGE
Apply oi l to
cover.
Tighten the cover bolts in a crisscross pattern in two
or three steps.
Install the brake pedal ( page 16-24).
Adjust the clutch lever freeplay (page 4-31).
Fill the cooling system with the recommended cool-
ant and bleed the air (page 7-7).
Fill the engine with the recommended transmission
oil (page 4-23).
Start the engine and check for oil leaks.
KICKSTARTER
REMOVAL
Remove the following:
- Right crankcase cover (page' 1-5)
- Clutch ( page 11 -71
Remove the snap ring, thrust washer, starter idle
gear and bushing.
Unhook the kickstarter return spring from the crank-
case.
Remove the kickstarter spindle assembly_
OISASSEMBL Y
Disassemble the kickstarter spi ndle by removing the
following:
- Return spring and collar
- Ratchet spring and starter ratchet
- Snap ring, thrust washers and pinion gear
- Pinion gear bushing
INSPECTION
Check the return spring and ratchet spring for
fatigue or damage.
Check th e starter ratchet fo r wear or damag e.
SPINDLE
PINION
GEAR
SNAP RING
SPRING
COLLAR
fJ
WASHERS
STARTER
RATCHET
11-15

Honda CRF450X 2010 Specifications

General

Brand	Honda
Model	CRF450X 2010
Category	Motorcycle
Language	English