SYMBOLS
The
symbols used throughout this manual show specific service procedures.
If
supplementary information is required pertaining to
these symbols,
it would be explained specifically in the text without the use of the symbols.
¢l'P
Replace the part(s) with
new
one(5) before assembly .
...-
""78
Use the recommended engine oil, unless otherwise specified.
-,
Use molybdenum oil solution (mixture of the engine oil and molybdenum grease in a ratio
of
1:
1) .
•
..s;;;m.
Use multi-purpose grease (lithium based multi-purpose grease
NLG
I
#2
or
equivalent).
Use molybdenum disulfide grease (containing more than 3% molybdenum disulfide, NLGI #2
or
equivalent).
~
Example
: Moly\<ot
eJ!l
BR-2 plus manufactured by
Dow Corn
ing U.S.A.
Multi-purpose
M-2
manufactured by Milsubishi Oil, Japan
Use molybdenum disulfide paste (containing
more
than
40
% molybdenum
disulfide, NLGI
#2
or
equivalent).
Example: Molykote®
G-n
Paste manufactured
by
Dow Corning U.S.A.
~
Honda Moly
60
(U.S.A. only)
Rocol ASP manufactured by Racol Limited, U.K.
Rocol
Paste manufactured by Sumico
lubricant
, Japan
...-'iiSitI
Use
silicone grease.
Dum
Apply a locking agent. Use a medium strength locking agent unless otherwise specified .
.,('Illll!
Apply sealant.
Use
DOT
4 brake fluid.
Use
the
recommended
brake lIuid unless otherwise specified .
..
Use
fork
or
suspension fluid.
•
•
•