Honda CRF450X 2010 User Manual

(
\.
(
\
CRANKCASE/ CRANKSHAFT /TRANSMISSION/ BALANCER
Remove the oil pump inner / outer rotors and shaft.
Remove the one-way valve.
Remove the dowel pins and gasket.
TRANSMISSION OISASSEMBL Y
Separate the crankcase halves (page 13-10),
Temporarily install the right crankcase.
Place the right crankcase facing down and separate
the right and left crankcase halves.
Remove the shift fork shafts.
Remove the shift fork guide pins from the shift
drum grooves and remove the shift drum.
Remove the shift forks.
Remove the mains haft and countershaft as an
assembly from the r ight crankcase.
Di sa ss emble th e tr ans mi ss ion:
• Keep track of the disassembled parts (gears,
bushings, washer s, and rings) by sliding them
onto a tool or a piece of wire .
• Do not remove the snap rings over the shafts.
Expand
the snap ring ends and slide the snap
ring off the Shaft, along with the gear behind it .
DOWEL PINS
MAINSHAFT J
COUNTERS
HAFT
ASSEMBLY
13-11

Honda CRF450X 2010 Specifications

General

Brand	Honda
Model	CRF450X 2010
Category	Motorcycle
Language	English