Honeywell ScanPal EDA51 Series User Manual

44 EDA51 User Guide
• If the update is successful, the Carrier Configure screen appears and
displays the updated carrier information, then restart the computer.
• If the update is unsuccessful, a message appears. Tap OK to return to the
Carrier Configure screen.
Activate the Phone
You use a SIM card to activate the phone on your EDA51 WWAN model computer
(EDA51-1). You can purchase the Nano SIM card from your network provider.
1. Select a network carrier. To learn how, see Add or Switch Between Network
Carriers on page 43.
2. Remove the battery from the computer, refer to page 6.
3. Open the Nano card’s silicone cover.
4. Open the card cover and insert the Nano SIM card.
5. Insert the battery, see on page 7.
Card Cover
SIM
SIM Card

Honeywell ScanPal EDA51 Series Specifications

General

Brand	Honeywell
Model	ScanPal EDA51 Series
Category	Handhelds
Language	English