HP 1650B User Manual

STORe
STORe
[:CONFig] command
The STORe command stores a configuration onto a disk. The [:CONFig]
specifier is optional and has no effect on the command. The c name >
parameter specifies the file to be stored to the disk. The < description z=
parameter specifies the file description.
Command Syntax:
:MMEMory:STOFle [:CONfig] c name >, c description z=
where:
c name z :: = string of up to 10 alphanumeric characters representing a valid file name
c description z= :: = string of up to 32 alphanumeric characters
Example: OUTPUT XXX;" :MMEM:STORE 'DEFAULTS','DEFAULT SETUPS'"
MMEMory Subsystem
7-14
HP 1650B/HP 16518
Programming Reference

HP 1650B Specifications

General

Brand	HP
Model	1650B
Category	Measuring Instruments
Language	English