HP 1650B User Manual

Note &
A command or query may be sent in either longform or shortform, or in
any combination of iongform and shortform. The HEADER and
LONGFORM commands only control the format of the returned data
and have no effect on the way commands are sent.
Refer to the chapter “System Commands” for information on turning the
HEADER and LONGFORM commands on and off.
Response Data Both numbers and strings are returned as a series of ASCII characters, as
Formats described in the following sections. Keywords in the data are returned in
the same format as the header, as specified by the LONGform command.
Like the headers, the keywords will always be in upper-case.
The following are possible responses to the “MACHINEl: TFORMAT:
LAB? ‘ADDR’ ” query.
MACHINE1:TFORMAT:LABEL “ADDR “,19,POSITIVEc terminator> (Header on;
Longform on)
MACHl:TFOR:lAB “ADDR “,19,POScterminator z- (Header on; Longform off)
“ADDR “,19,POSITIVE4erminator > (Header off; Longform on)
“ADDR “,19,POS<terminator> (Header off; Longform off)
Note
d pfer to the individual commands in this manual for information on the
ormat (alpha or numeric) of the data returned from each query.
introduction to Programming an Instrument
1-14
HP 1650B/HP 16518
Programming Reference

HP 1650B Specifications

General

Brand	HP
Model	1650B
Category	Measuring Instruments
Language	English