Q Menu and Desktop Video Profiles
Software Guide 2–3
Obtaining Information About
System-Defined Items
To display a description of a system-defined Q Menu item or
to test any Q Menu item by executing the item command:
1. Press the Q menu button or select the Q icon in the
system tray.
2. Select the Q Menu Settings item.
3. On the Items to Display On Q Menu list:
❏ To display a description of a system-defined item,
select the item. (A description is displayed in a panel
beneath the list.) User-defined items are not described.
❏ To test any item by executing the item command,
select the item, then select the Execute button.
Procedures for using all system-defined items are provided in the
“Using a System-Defined Item” section, later in this chapter.
Setting Q Menu Preferences
The Q Menu can display up to 40 items. Several system-defined
items are displayed by default. Additional system-defined and
user-defined items can be added. All items, including the default
items, can be removed.
The items on the Q Menu are managed from the Items to Display
On Q Menu list.
Accessing the Items to Display on Q Menu List
The Items to Display on Q Menu list can be accessed at any time
by using either of the following procedures:
■ Press the Q menu button or select the Q icon in the system
tray, then select the Q Menu Settings item.
■ Select Start > Control Panel > Other Control Panel Options
(found on the left side of the Control Panel window) >
Q Menu Settings.
334243-001.book Page 3 Friday, August 15, 2003 10:22 AM
To Next Page
Loading...
Need help?
General
