HP FlexFabric 5700 series User Manual

199
Ste
p
Command Remarks
4. Set the minimum password
length.
password-control length length
• In non-FIPS mode, the default
setting is 10 characters.
• In FIPS mode, the default length
is 15 characters.
5. Configure the password
composition policy.
password-control composition
type-number type-number
[ type-length type-length ]
• In non-FIPS mode, by default, a
password must contain at least
one character type and at least
one character for each type.
• In FIPS mode, by default, a
password must contain at least
four character types and at
least one character for each
type.
6. Configure the password
complexity checking policy.
password-control complexity
{ same-character | user-name }
check
By default, the system does not
perform password complexity
checking.
7. Set the maximum number of
history password records for
each user.
password-control history
max-record-num
The default setting is 4.
8. Specify the maximum number
of login attempts and the
action to be taken when a
user fails to log in after the
specified number of attempts.
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for 1
minute before trying again.
9. Set the number of days during
which a user is notified of the
pending password expiration.
password-control
alert-before-expire alert-time
The default setting is 7 days.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
password-control
expired-user-login delay delay
times times
By default, a user can log in three
times within 30 days after the
password expires.
11. Set the maximum account idle
time.
password-control login idle-time
idle-time
The default setting is 90 days.
Setting user group password control parameters
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a user group and enter
user group view.
user-group group-name
By default, no user group exists.
For information about how to
configure a user group, see
"Configuring AAA."
3. Configure the password
expiration time for the user
group.
password-control aging aging-time
By default, the password
expiration time of the user group
equals the global password
expiration time.

HP FlexFabric 5700 series Specifications

General

Brand	HP
Model	FlexFabric 5700 series
Category	Switch
Language	English