315
Terminating the connection with the SFTP server
Task Command
Remarks
Terminate the connection with the
SFTP server and return to user view.
• bye
• exit
• quit
Available in SFTP client view.
These three commands have the same
function.
Configuring the device as an SCP client
This section describes how to configure the device as an SCP client to establish a connection with an SCP
server and transfer files with the server.
When you try to access an SCP server, the device must use the server's host public key to authenticate the
server. If the server's host public key is not configured on the device, the device will notify you to confirm
whether to continue with the access.
• If you choose to continue, the device accesses the server and downloads the server's host public
key.
• If you choose to not continue, the connection cannot be established.
In an insecure network, HP recommends that you configure the server's host public key on the device.
To transfer files with an SCP server:
To Next Page
Loading...
Need help?
General
