To Next Page

To Previous Page

# Enable the cluster function.

[SwitchB] cluster enable

# Configure a private IP address range for the member switches, which is from 172.16.0.1 to 172.16.0.7.

[SwitchB] cluster

[SwitchB-cluster] ip-pool 172.16.0.1 255.255.255.248

# Configure the current device as the management switch, and establish a cluster named abc.

[SwitchB-cluster] build abc

Restore topology from local flash file,for there is no base topology.

(Please confirm in 30 seconds, default No). (Y/N)

# Enable management VLAN auto-negotiation.

[abc_0.SwitchB-cluster] management-vlan synchronization enable

# Configure the holdtime of the member switch information as 100 seconds.

[abc_0.SwitchB-cluster] holdtime 100

# Configure the interval to send handshake packets as 10 seconds.

[abc_0.SwitchB-cluster] timer 10

# Configure the FTP Server, TFTP Server, Log host and SNMP host for the cluster.

[abc_0.SwitchB-cluster] ftp-server 63.172.55.1

[abc_0.SwitchB-cluster] tftp-server 63.172.55.1

[abc_0.SwitchB-cluster] logging-host 69.172.55.4

[abc_0.SwitchB-cluster] snmp-host 69.172.55.4

# Add the device whose MAC address is 00E0-FC01-0013 to the blacklist.

[abc_0.SwitchB-cluster] black-list add-mac 00e0-fc01-0013

[abc_0.SwitchB-cluster] quit

# Add port Ethernet 1/0/1 to VLAN 2, and configure the IP address of VLAN-interface 2.

[abc_0.SwitchB] vlan 2

[abc_0.SwitchB-vlan2] port Ethernet 1/0/1

[abc_0.SwitchB] quit

[abc_0.SwitchB] interface vlan-interface 2

[abc_0.SwitchB-Vlan-interface2] ip address 163.172.55.1 24

[abc_0.SwitchB-Vlan-interface2] quit

# Configure VLAN-interface 2 as the network management interface.

[abc_0.SwitchB] cluster

[abc_0.SwitchB-cluster] nm-interface vlan-interface 2

125

Brand

Model

JD320B

HP JD320B User Manual

Other manuals for HP JD320B