HP JD320B User Manual

serial number
This field indicates the serial number of the device that generates the system information. It is displayed
only when the system information is sent to a log host in the format of UNICOM.
source
This field indicates the source of the information, such as the source IP address of the log sender. This field
is optional and is displayed only when the system information is sent to a log host in the format of HP.
content
This field provides the content of the system information.
Configuring information center
Information center configuration task list
Complete the following tasks to configure information center:
Task Remarks
Outputting system information to the console Optional
Outputting system information to a monitor terminal Optional
Outputting system information to a log host Optional
Outputting system information to the trap buffer Optional
Outputting system information to the log buffer Optional
Outputting system information to the SNMP module Optional
Outputting system information to the web interface Optional
Saving security logs into the security log file Optional
Configuring synchronous information output Optional
Disabling a port from generating link up/down logging information Optional
Outputting system information to the console
Outputting system information to the console
Follow these steps to output system information to the console:
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a specified
channel number
info-center channel
channel-number name
channel-name
Optional
See Table 5 for default channel
names.
159

HP JD320B Specifications

General

Brand	HP
Model	JD320B
Category	Switch
Language	English