HP JD320B User Manual

Table 5 Information channels and output destinations
Information
channel
number
Default
channel name
Default output destination Description
0 console Console
Receives log, trap and debugging
information.
1 monitor Monitor terminal
Receives log, trap and debugging
information, facilitating remote
maintenance.
2 loghost Log host
Receives log, trap and debugging
information and information will be
stored in files for future retrieval.
3 trapbuffer Trap buffer
Receives trap information, a buffer
inside the device for recording
information.
4 logbuffer Log buffer
Receives log and debugging
information, a buffer inside the device
for recording information.
5 snmpagent SNMP module Receives trap information.
6 channel6 Web interface Receives log information.
7 channel7 Not specified
Receives log, trap, and debugging
information.
8 channel8 Not specified
Receives log, trap, and debugging
information.
9 channel9 Not specified
Receives log, trap, and debugging
information.
Outputting system information by source module
The system is composed of a variety of protocol modules, and configuration modules. System information
is classified, filtered, and output according to source modules. You can use the info-center source ?
command to view the supported information source modules.
Default output rules of system information
The default output rules define the source modules allowed to output information on each output
destination, the output information type, and the output information level as shown in Table 6. The
following applies to all modules by default:
• All log information is allowed to be output to the web interface; log information with severity level
equal to or higher than informational is allowed to be output to the log host; log information with
severity level equal to or higher than informational is allowed to be output to the console, monitor
terminal, and log buffer; log information is not allowed to be output to the trap buffer and the SNMP
module.
• All trap information is allowed to be output to the console, monitor terminal, log host, web interface,;
trap information with severity level equal to or higher than informational is allowed to be output to
the trap buffer and SNMP module; trap information is not allowed to be output to the log buffer.
155

HP JD320B Specifications

General

Brand	HP
Model	JD320B
Category	Switch
Language	English