EasyManuals Logo
Home>HP>Switch>JD320B

HP JD320B User Manual

HP JD320B
189 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
To do… Use the command… Remarks
Enter system view system-view —
Enter PoE interface view
interface interface-type
interface-number
—
Apply the PoE profile to the current
PoE interface
apply poe-profile { index index |
name profile-name }
Required
CAUTION:
A PoE profile can be applied to multiple PoE interfaces, and a PoE interface can be applied with only one
PoE profile.
Upgrading PSE processing software in service
You can upgrade the PSE processing software in service in either of the following modes:
• Refresh mode—This mode enables you to update the PSE processing software without deleting it.
You can upgrade the PSE processing software in the refresh mode through the command line.
• Full mode—This mode deletes the PSE processing software and reloads it. If the PSE processing
software is damaged (you cannot execute any of the PoE commands successfully), you can upgrade
the PSE processing software in full mode to restore the PSE function.
An in-service PSE processing software upgrade may be unexpectedly interrupted (for example, an error
results in device reboot). If you fail to upgrade the PSE processing software in full mode after reboot, you
can power off the device and restart it before upgrading it in full mode again. After upgrade, the new
PSE processing software take effect.
Follow these steps to upgrade the PSE processing software in service:
To do… Use the command… Remarks
Enter system view system-view —
Upgrade the PSE processing
software in service
poe update { full | refresh }
filename
Required
Displaying and maintaining PoE
To do… Use the command… Remarks
Display PSE information
display poe device [ | { begin |
exclude | include }
regular-expression ]
Display the power supply state of
the specified PoE interface
display poe interface
[ interface-type interface-number ]
[ | { begin | exclude | include }
regular-expression ]
Display the power information of a
PoE interface(s)
display poe interface power
[ interface-type interface-number ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
79

Table of Contents

Other manuals for HP JD320B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP JD320B and is the answer not in the manual?

HP JD320B Specifications

General IconGeneral
BrandHP
ModelJD320B
CategorySwitch
LanguageEnglish

Related product manuals