Step 6 Select This iBMC from the Domain drop-down list.
Step 7 Click Log In.
----End
5.11.5 Checking the Server
Check the server in the sequence shown in Figure 5-26. The method to be used
depends on the actual situation.
For details about CLI commands, see the
TaiShan Rack Server iBMC User Guide
.
Figure 5-26 Checking the server
Procedure
Step 1 Check indicator status.
Ensure that hardware devices are working correctly.
For details, see 2.2 Front Panel Indicators and Buttons and 2.4 Rear Panel
Indicators.
Step 2 Check the server.
● Check the server using the iBMC WebUI.
a. Log in to the iBMC over the WebUI. For details, see 5.11.4 Logging In to
the iBMC WebUI.
TaiShan 200 Server (Model 2280)
User Guide 5 Installation and Conguration
Issue 09 (2021-01-12) Copyright © Huawei Technologies Co., Ltd. 71
To Next Page
Loading...
Need help?
General