8--2
103
Use and maintenance manual S20DSP
Maintenance requirements
H All ordinary and extraordinary maintenance must be carried out with the power
switched off and the machine in emergency condition.
H To guarantee perfect operation, all spare parts must be originals.
H On completion of maintenance works, ensure that the replaced parts or any tools
used have been removed from the machine before starting it up.
H Any behaviour not in accordance with the instructions for using the machine may
create risks for the operator.
H Therefore, read and follow all the instructions for use and maintenance of the ma-
chine and those on the product itself.
General maintenance
Daily
The daily maintenance operations to carry out on the machine are as follows:
" remove all swarf from the machine (preferably with a non---fibrous cloth);
" empty the swarf drawer (this is located on the right side of the base);
" topupthelubricant/coolantlevel;
" check state of blade wear and replace if necessary;
" check the blade cleaning brush, clean and relocate; if worn, replace;
" at the end of the working day, decrease tension in the blade to 550 Kg to
avoid unnecessary and harmful strain on the tool.
Weekly
The weekly maintenance operations are as follows:
" remove all swarf;
" clean the vice and lubricate all joints and sliding surfaces with a good quality
oil;
To Next Page
Loading...
General