Hypertherm HPR130 Manual Gas User Manual

SPECIFICATIONS
2-6 HPR130 Manual Gas Instruction Manual
0
Ignition console – 078172
• The ignition console may be mounted locally on the power supply (LHF) or remotely on the cutting table’s
bridge (RHF). See Installation section for details.
• Maximum cable length from the ignition console to the torch lifter station is 15 m (50 ft). Allow room to
remove the top for servicing.
• The ignition console may be mounted horizontally or vertically.
9.1 kg
20 lb
283 mm
11.125"
219 mm
8.625"
194 mm
7.625"
152 mm
6"
216 mm
8.5"

Hypertherm HPR130 Manual Gas Specifications

General

Brand	Hypertherm
Model	HPR130 Manual Gas
Category	Welding System
Language	English