5-117
05
NOTICE
• When you delete a paired device,
the Call history and Contacts
stored in the system are also
deleted.
• To re-use a deleted device, you
must pair the device again.
Using a Bluetooth audio device
You can listen to music stored in the
connected Bluetooth audio device via
your vehicle’s speakers.
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window
displays, turn the [TUNE] knob to
select Bluetooth audio and then
press the knob.
(1) Information about the song cur-
rently playing
1. Press the [MENU/CLOCK] button
on the control panel to access the
following a menu option.
2. Turn the [TUNE] knob to select
option and then press the knob.
• Sound settings: You can
change the settings related to
sounds, such as location where
sound will be concentrated and
the output level for each range.
- Position: Select a location
where sound will be concen-
trated in the vehicle. Select
Fade (Fader) or Balance,
turn the [TUNE] knob to select
the desired position, and then
press the knob. To set sound
to be centered in the vehicle,
select Centre (Center).
- Equaliser (Tone): Adjust the
output level for each sound
tone mode.
- Speed dependent vol.: Set
the volume to be adjusted
automatically according to
your driving speed.
NOTICE
• Depending on vehicle models or
specifications, available options
may vary.
• Depending on the system or
amplifier specifications applied to
your vehicle, available options
may vary.
• Mode popup: Set to display
mode selection window when
the [AUDIO] button is pressed
on the control panel.
• Date/Time: You can change the
date and time that are shown on
the system display.
- Set date: Set date to display
on the system display.
- Set time: Set time to display
on the system display.
To Next Page
Loading...
Need help?
General
