8-76
Maintenance
License plate light bulb
replacement
OAI3089029
1. Using a flat-blade screwdriver gen-
tly pry the lens cover from the lamp
housing.
2. Remove the socket from the as-
sembly by turning the socket coun-
terclockwise until the tabs on the
socket align with the slots on the
assembly.
3. Remove the bulb by pulling it
straight out.
4. Install a new bulb.
5. Reinstall in the reverse order.
Interior light bulb replacement
OAC3089030TU
ï‚¢
Room lamp
ï‚¢
Luggage room lamp
OAC3089031TU
1. Using a flat-head screwdriver, gen-
tly pry the lens from the interior
light housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb into the socket.
4. Align the lens tabs with the interior
light housing notches and snap the
lens into place.
NOTICE
Be careful not to damage the cover,
tab, and plastic housing.
To Next Page
Loading...
Need help?
General
