7-23
07
Jacklabel
The actual Jack label in the vehicle
may differ from the illustration.
For more detailed specifications,
refer to the label attached to the jack.
1. Model Name
2. Maximum allowable load
3. When using the jack, set your park-
ing brake.
4. When using the jack, stop the
engine.
5. Do not get under a vehicle that is
supported by a jack.
6. The designated locations under
the frame
7. When supporting the vehicle, the
base plate of jack must be vertical
under the lifting point.
8. Shift into R (Reverse) gear on vehi-
cles with Manual transmission or
move the shift lever to the N
(Neutral) position on vehicles with
Automated manual transmission.
9. The jack should be used on firm
level ground.
10. Jack manufacture
11. Production date
12. Representative company and
address
OHYK065011
To Next Page
Loading...
Need help?
General
