7-30
Emergency situations
Distributingthesealant
OHI068053
9. Immediately drive approximately
7~10 km (4~6 miles or, about
10min) to evenly distribute the
sealant in the tire.
Do not exceed a speed of 80 km/h
(50 mph). If possible, do not fall below
a speed of 20 km/h (12 mph).
While driving, if you experience any
unusual vibration, ride disturbance or
noise, reduce your speed and drive
with caution until you can safely pull
off of the side of the road.
Call for road side service or towing.
Checkingthetireinflation
pressure
OIGH067043
OAC3079012TU
1. After driving approximately 7~10
km (4~6 miles or about 10 min),
stop at a safety location.
2. Connect the filling hose (3) of the
compressor directly to the tire
valve.
3. Connect between compressor and
the vehicle power outlet using the
cable and connectors.
To Next Page
Loading...
Need help?
General
