6-73
06
System setting and activation
System setting
• ThedrivercanactivatetheSpeed
Limit Warning by selecting ‘User
Settings → Driver Assistance →
Driving Assist → Speed Limit
Warning.
• WhenISLWisactivated,thesym-
bols appear on the instrument
cluster to display the speed limit
information and overtaking restric-
tion.
• WhenISLWisactivatedinthenav-
igation setting, the above informa-
tion and the restriction are also dis-
played on the navigation.
System activation
• ISLW displays the speed limit
information and alerts the overtak-
ing restriction, when your vehicle
passes by the relevant traffic signs.
• ISLWdisplaysthepreviousspeed
limit information, right after the
ignition switch is placed to the ON
position.
• Youmayfinddifferent speedlimit
information for the same road. The
information is displayed depending
onthedrivingsituations.Because,
traffic signs with additional sign
(e.g. rainy, arrow, etc.) are also
detected and compared with vehi-
cle internal data (e.g. wiper opera-
tion, turn signal, etc.).
i
Information
The speed limit information on the
instrumentclustermaydifferfromthe
one on the navigation. In this case,
checkthespeedunitsettingonthenav-
igation.
Display
Display in the bottom of the
cluster
OTM048177L
The cluster displays the speed limit
information, overtaking restriction
and conditional road sign.
OTM048178L
Conditionalroadsign
If ISLW detects a conditional road
sign, the symbol of road sign is over-
lapped at the bottom or left of the
speed limit on the cluster.
There may be signs with different
speed limits on the same road. For
example, normally, the speed limit is
120 km/h (75 mph), however the
speedlimitis90km/h(55mph)when
it is raining or snowing.
The conditional road sign means that
you observe the speed limit and over-
taking prohibition on certain condi-
tions, such as when rain or snow.
To Next Page
Loading...
Need help?
General
