8-74
Maintenance
Rear combination light bulb
replacement
OAC3089025TU
(1) Turn Signal Light
(2) Tail/Stop Light
(3) Reflex Reflector Light
(4) Rear Fog Light
(5) Back-up Light
Turn Signal Light, Tail/Stop Light
OAC3089048TU
OAC3089049TU
1. Open the tailgate
2. Loosen the light assembly retain-
ing screws with a cross-tip screw-
driver.
3. Remove the rear combination light
assembly from the body of the ve-
hicle.
OAC3089041TU
[1] : Turn Signal Light, [2] : Tail/Stop Light
4. Remove the socket from the as-
sembly by turning the socket coun-
terclockwise until the tabs on the
socket align with the slots on the
assembly.
5. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
6. Insert a new bulb by inserting it into
the socket and rotating it until it
locks into place.
7. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
8. Reinstall the light assembly to the
body of the vehicle.
To Next Page
Loading...
Need help?
General
