Position FRU name
Possible failing
component
Type, CCIN, or part
number (use the
Type, model, and
part number list to
determine the part
number when the
type or CCIN are
given.)
Remove and
replace/recovery
procedure
C07 PCI card IOA See the Type, model,
and part number list.
Go to Models 270,
800, and 810 - Cards
- Concurrent.
MB1 System unit
backplane
1. Service processor
2. IOP
3. Card enclosure or
backplane
4. Clock card
5. SPCN card
6. HSL I/O bridge
7. System unit
backplane
8. HSL ring
connection
9. Multi-adapter
bridge (all)
282F (See page 526)
Note: Embedded IOP
(type 284E) is
exchanged with the
system unit
backplane, 282F.
Go to Models 270,
800, and 810 -
System unit
backplane - MB1
D01 to D06 Disk unit Disk unit See the Type, model,
and part number list.
Go to Recovery
procedures.
D07 Optical device Optical device See the Type, model,
and part number list.
Go to Models 270,
800, and 810 -
Removable media -
D07 and D08.
D08 Tape unit Tape unit See the Type, model,
and part number list.
Go to Models 270,
800, and 810 -
Removable media -
D07 and D08.
P01 Power supply Power supply 24L1402 Go to Models 270,
800, and 810 - Power
supply - P01
B01, B02 AMD Air moving device
(AMD)
See Final assembly
— Models 270, 800,
and 810.
Go to Models 270,
800, and 810 - Air
moving device - B01
and B02
NB1 Control panel Control panel 247D (See page 523) Go to Models 270,
800, and 810 -
Control panel - NB1
DB1 Device board Device board 28CD (See page 528) Go to Models 270,
800, and 810 - Device
board - DB1, DB2,
and DB3
M01 Memory Riser Card Memory Riser Card 2884 (See page 527) Go to Models 270,
800, and 810 - Cards
(dedicated)
Analyze hardware problems 243
To Next Page
Loading...
Need help?
General