Figure 21. FC 5095 or FC 0595 Expansion I/O Tower - power and signal cables
Table 37. FC 5095 or FC 0595 Expansion I/O Tower - Power cables
Name Description Part number
PWRC01 CB1 to device backplanes DB1 and DB2 52P0416
PWRC02 CB1 to Air moving devices (AMDs) B01, B02, B03, and B04 53P4065
Table 38. FC 5095 or FC 0595 Expansion I/O Tower - Signal cables
Name Description Part number
SIGC01 CB1 to Device backplane (DB1, left/top) 53P0417
SIGC02 CB1 to Device backplane (DB2, right/bottom) 53P0418
SIGC03 Operation panel (NB1) to System unit backplane (CB1) 53P0414
Removable media address jumper positions
For use by authorized service providers.
Note the following:
v On Models 270, 800, and 810, only devices in location D07 require address jumpers. Devices in
location D08 do not require address jumpers.
v On the Model 820, only devices in location D13 require address jumpers. Devices in location D14 do
not require address jumpers.
518 Hardware (Remove and Replace; Part Locations and Listings)
To Next Page
Loading...
Need help?
General