v For information about commands related to communications, see the CL command finder in the
Programming, CL topic.
v For information about Windows NT
(R)
Server user problems, refer to the Windows
(R)
server on
iSeries
(TM)
page in the Networking topic.
Cabling information:
– Planning for cabling: See the Plan for cables page in the Plan for hardware and software, Planning
reference topic.
– For power cable part numbers: See Determine line cord, plug, and receptacle type in the Plan for
hardware and software topic.
– For Cabling instructions: See Print server and rack cabling instructions in the Plan for hardware and
software topic.
v
For information on environment controls, see Environment reference in the Plan for hardware and
software topic.
v For information on problem handling procedures, see the Getting started with server troubleshooting
page in the Troubleshooting and service topic.
v For information on disk compression, see the Choose compression type page in the Systems
management, Back up your server, Before you save anything topic.
To save a PDF on your workstation for viewing or printing:
1. Right-click the PDF in your browser (right-click the link above).
2. Click Save Target As...
3. Navigate to the directory in which you would like to save the PDF.
4. Click Save.
If you need Adobe Acrobat Reader to view or print these PDFs, you can download a copy from the Adobe
Web site (www.adobe.com/products/acrobat/readstep.html)
.
Analyze hardware problems 601
To Next Page
Loading...
Need help?
General