23. Psychrometric chart showing recommended and allowable operating environments for the tape
library..........................................................................................................................................................26
24. Types of receptacles.................................................................................................................................32
25. Removing the module from the box......................................................................................................... 39
26. The module after removal from the box...................................................................................................39
27. Unlatching the top of the module.............................................................................................................40
28. Removing the top of the module.............................................................................................................. 40
29. The module is opened to show the foam packing................................................................................... 41
30. The foam packing is removed, and the internal components are shown - Base Module.......................41
31. Lowering the front of the top cover.......................................................................................................... 43
32. Unlocking the spring loaded lock............................................................................................................. 44
33. Removing the cover.................................................................................................................................. 44
34. Lifting the cover and locking it..................................................................................................................45
35. Universal rack connector.......................................................................................................................... 45
36. Incorrect connector locations ................................................................................................................. 46
37. Correct connector locations .....................................................................................................................46
38. Mounting the rails to the connectors........................................................................................................47
39. Side rails installed.....................................................................................................................................48
40. Sliding the library into the rack.................................................................................................................48
41. Library in the rack......................................................................................................................................49
42. Hole for alignment pin...............................................................................................................................50
43. Alignment lever lock................................................................................................................................. 50
44. Alignment lever locked or engaged to lower module.............................................................................. 51
45. Alignment lever unlocked or disengaged.................................................................................................51
46. Two modules in rack, seen from the rear.................................................................................................52
47. Connected modules.................................................................................................................................. 52
xii
To Next Page
Loading...
Need help?
General