Rear panel
Figure 12. Rear panel
Table 6. Rear panel descriptions
Number Item Comments
1 Power supply 1
Standard on Base Module
Optional on Expansion Module (required
if drives are present)
2 Power supply 2 Optional on Base Module and Expansion Modules
3 Tape drive bays
4 Upper Expansion Module connection port
5 USB port Base Module only
6 Ethernet port B Base Module only (secondary port for service
usage)
7 Ethernet port A Base Module only
8 Module alignment mechanism
9 Lower Expansion Module connection port
10 Unit Identiîš³er LED, Blue
11 Controller Error LED, Yellow
12 Controller Health Status LED, Green
13 Product Serial Number, Tag location
Physical and logical addresses of modules
The library assigns each module a unique address to indicate its physical location, shown in Figure 13 on
page 9. The physical numbering is bottom up on all modules.
8
IBM TS4300 Tape Library Machine Type 3555: User's Guide
To Next Page
Loading...
Need help?
General