IBM maintains the current levels of device drivers and driver documentation on the web. Go to http://
www.ibm.com/support/îš³xcentral and follow the steps to access this material.
1. From the Fix Central web page, choose the Select Product tab, select System Storage from the
Product Group list.
2. Select Tape Systems from the System Storage list.
3. Select Tape drivers and software from the Tape systems list.
4. Select Tape device drivers from the Tape drivers and software list.
5. Select the appropriate operating system from the Platform list and click Continue.
6. Select the appropriate driver from the list.
The IBM
®
Tape Device Drivers Installation and User's Guide can be found on the web at http://
www-01.ibm.com/support/docview.wss?rs=577&uid=ssg1S7002972 .
Network connectivity
This library supports various browsers and interfaces.
Supported browsers
IBM supports higher versions of the browsers if the vendors don’t remove or disable functions that the
product relies upon. For browser levels higher than the versions that are certiîš³ed with the product,
customer support accepts usage-related and defect-related service requests. As with operating system
and virtualization environments, if IBM support can’t re-create the issue in the lab, the client might be
asked to re-create the problem on a certiîš³ed browser version to determine whether a product defect
exists. Defects aren’t accepted for cosmetic differences between browsers or browser versions that don’t
affect the functional behavior of the product. If a problem is identiîš³ed in the product, defects are
accepted. If a problem is identiîš³ed with the browser, IBM might investigate potential solutions or
workarounds that the client can implement until a permanent solution becomes available.
Supported interfaces
This tape library supports the Gigabit Ethernet interface in either auto negotiation or îš³xed modes of 10
Mbps, 100 Mbps, and 1 Gbps by using half or full duplex. The library supports the following TCP/IP
protocols:
IPv4 and IPv6 support
This tape library supports Internet Protocol (IP) addresses in both IPv4 and IPv6 format. Both the
integrated management console (IMC) and the management GUI allow the deîš³nition of IPv4 and IPv6
addresses. The key proxy determines the IP version that is used and presents the correct IP address
and parameters to the IP Stack.
Simple Network Management Protocol (SNMP)
SNMP traps are supported for drive and library events. SNMP management query functions are
supported by using a standard Management Information Block (MIB).
Hyper Text Transfer Protocol (HTTP)
An embedded web server provides a management GUI for library management and query capabilities.
Secure Socket Layer (SSL)
The tape library supports SSL, a protocol for transmitting private documents through the internet.
Key Management Interoperability Protocol (KMIP)
Used for communicating with the IBM
®
Security Lifecycle Key Manager and other security key
management software.
Simple Mail Transfer Protocol (SMTP)
The tape library supports SMTP for sending email alerts.
Network Time Protocol (NTP)
The tape library supports NTP for external time-and-date synchronization.
Chapter 1. Overview
21
To Next Page
Loading...
Need help?
General