IP CAMERA TEST - IP Camera Test Flow
A typical test sequence consists of providing power to the camera,
connecting to it and accessing its controls, setting it up and creating a
report to record its correct operation:
1. POWER
Provide power to the camera and allow time to boot up.
2. IP SET
Use IP Discovery to find the IP address of a single camera or use
NETWORK CAMERA or ONVIF to find the IP address of a network
connected camera.
3. ACCESS
User name or password may be needed to access the camera.
4. SETUP
Setup camera parameters such as name, IP address, video format etc via
ONVIF and web browser.
5. DOCUMENT
Create test reports for ONVIF IP cameras and screen shots for Analog &
HD coax cameras.
To Next Page
Loading...
Need help?
General
