Page 18 Setup and Assembly Manual
A.8 Maintenance
Important: While cleaning the scanner, ensure that no l iquids will penetrate into the
device housing.
A.8.1 Touchscreen
The touchscreen can be cleaned with a dr y micro fiber cloth. Before cleaning the
touchscreen the WideTEK 25 must be switched off (see chapter A.11.2) and the main
power switch (see Picture 7, item 1) must be set to position 0.
A.8.2 Surfaces
Use a soft, dampened cloth to clean the housing of the scanner. Recommended is a micro
fiber cloth.
A.8.3 Glass plate
Important: Do not use any cleanser with solvents to clean the glass plate!
The glass plate of the WideTEK 25 has a special non-reflective surface coating.
Clean the glass plate with an appr opriate glass cleaner and us e a s oft cloth.
Recommended is a micro fiber cloth.
After cleaning dry the glass plate with a soft cloth.
A.9 Repair
Note: There are not any parts of the WideTEK 25 scanner which can be repaired by
the user.
All repairs should be done only by a trained technician.
To Next Page
Loading...
Need help?
General
