Inovance CS500 User Manual

Chapter 4 Operation and Display
4.1 Operation Panel
You can modify the parameters, monitor the working status and start or stop the CS500 by
operating the operation panel, as shown in the following figure.
Figure 4-1 Diagram of the operation panel
Command source indicator
On: local control
Off: remote control
Forward/Reverse
rotation indicator
On: forward rotation
Off: reverse rotation
RUN indicator
Data display
Programming
key
(Reserved)
RUN key
(Reserved)
Stop/Reset key
Shift key
Ƹ Increment key
 Decrement key
Confirm key
Unit indicator
Tuning/Fault indicator
4.1.1 Description of Indicators
z RUN
When the indicator is on, the AC drive is in the running state; when the indicator is off,
the AC drive is in the stop state.
z LOCAL/REMOT
It indicates whether the AC drive is operated via operation panel, terminals or
communication.
LOCAL/REMOT: off
Operation panel
LOCAL/REMOT: on
Terminals
LOCAL/REMOT: blinking
Communication
z FWD/REV
When the indicator is on, it indicates forward rotation; when the indicator is off, it
indicates reverse rotation.
z TUNE/TC
When the indicator is on, it indicates the auto-tuning state.
z Unit Indicators
efesotomas
y
on.com

Inovance CS500 Specifications

General

Brand	Inovance
Model	CS500
Category	DC Drives
Language	English