Preface
Thank you for purchasing the CS500 specialized AC drive for crane.
The CS500 specialized AC drive for crane is designed by Shenzhen Inovance Technology
Co., Ltd. based on the running features of the crane equipment by optimizing the
algorithm of the MD320 series general-purpose AC drive. The automatic control function
is added to the braking mechanism of the crane equipment, which simplifies the user's
control system. The CS500 is mainly used to drive the asynchronous motor for the control
of upward, downward and horizontal movement, slewing, and walking of the crane
equipment.
This manual describes how to properly use the CS500 AC drive, covering installation,
operation, maintenance and inspection. Read and understand the instructions and safety
precautions in the manual before the use.
Note
z The drawings in the manual are sometimes shown without cover or protective guard.
Remember to install the cover or protective guard as specified first, and then perform
operations in accordance with the instructions.
z The drawings in the manual are shown for description only and may not match the product that
you have purchased.
z The instructions are subject to change due to product upgrade, specification modification, as
well as the efforts to increase the accuracy and convenience of the manual.
z Contact the regional agent or customer service center of Inovance if the manual delivered is
lost or damaged.
z Contact the customer service center of Inovance if you have problems during the use.
z Service Hotline: 400-777-1260
efesotomas
on.com
To Next Page
Loading...
Need help?
General