Intel S1200V3RP Technical Product Specification

BIOS Setup Interface Intel® Server Board S1200V3RP TPS
Revision 1.2
94
Key
Option
Description

Select Menu
The down arrow is used to select the next value in a menu item’s option list,
or a value field’s pick list. The selected item must then be activated by
pressing the <Enter> key.
<Tab>
Select Field
The left and right arrow keys are used to move between the major menu
pages. The keys have no effect if a sub-menu or pick list is displayed.
-
Change Value
The <Tab> key is used to move between fields. For example, <Tab> can be
used to move from hours to minutes in the time item in the main menu.
+
Change Value
The minus key on the keypad is used to change the value of the current
item to the previous value. This key scrolls through the values in the
associated pick list without displaying the full list.
<F9>
Setup Defaults
Pressing the <F9> key causes the following to display:
Load Optimized Defaults?
Yes No
If “Yes” is highlighted and <Enter> is pressed, all Setup fields are set to
their default values. If “No” is highlighted and <Enter> is pressed, or if the
<Esc> key is pressed, the user is returned to where they were before <F9>
was pressed without affecting any existing field values.
<F10>
Save and Exit
Pressing the <F10> key causes the following message to display:
Save configuration and reset?
Yes No
If “Yes” is highlighted and <Enter> is pressed, all changes are saved and
the Setup is exited. If “No” is highlighted and <Enter> is pressed, or the
<Esc> key is pressed, the user is returned to where they were before
<F10> was pressed without affecting any existing values.
9.4.1.4 Setup Screen Menu Selection Bar
The Setup Screen Menu selection bar is located at the top of the BIOS Setup Utility screen. It
displays tabs showing the major screen selections available to the user. By using the left and
right arrow keys, the user can select the listed screens. Some screen selections are out of the
visible menu space, and become available by scrolling to the left or right of the current
selections displayed.
9.4.2 BIOS Setup Utility Screens
The following sections describe the screens available in the BIOS Setup utility for the
configuration of the server platform.
For each of these screens, there is an image of the screen with a list of Field Descriptions which
describe the contents of each item on the screen. Each item on the screen is hyperlinked to the
relevant Field Description. Each Field Description is hyperlinked back to the screen image.
These lists follow the following guidelines:
 The text heading for each Field Description is the actual text as displayed on the BIOS
Setup screen. This screen text is a hyperlink to its corresponding Field Description.
 The text shown in the Option Values and Help Text entries in each Field Description are
the actual text and values are displayed on the BIOS Setup screens.

Intel S1200V3RP Specifications

General

Brand	Intel
Model	S1200V3RP
Category	Server Board
Language	English