Intel® Server Board S1200V3RP TPS Functional Architecture
Revision 1.2
- Gen3 speeds at 8 GT/s (no 8b/10b encoding)
- Can operate at 2.5 GT/s, 5 GT/s, or 8 GT/s
The Intel
®
Server Board S1200V3RPL and S1200V3RPS support PCIe slots:
- Slot 7: PCI Express* Gen2 x1 electrical with x8 physical connector, from PCH.
- Slot 6: PCI Express* Gen2 x 16 or Gen3 x8 electrical with x16 physical connector,
from processor.
- Slot 5: PCI Express* Gen2 x8 or x4 electrical with x8 physical connector, from
processor.
- Slot 4: PCI Express* Gen2 x4 electrical with x8 physical connector, from PCH.
The Intel
®
Server Board S1200V3RPO and S1200V3RPM support PCIe slots:
- Slot 6: PCI Express* Gen3 x16 electrical with x16 physical connector, from processor.
Table 5. PCI Express* Speed Matrix for Each Configuration
PCI
Express*
Gen3 x8
or Gen2
x16
PCI
Express*
Gen2 x16 or
Gen3 x8
PCI
Express*
Gen3 x8 or
don’t have
add-in card
Note: If no device is installed on IO Module connector or Slot5, the device connecting to Intel
®
SAS module connector can work as PCI Express* Gen2 x4 electrical; if any device is installed
on IO Module connector or Slot5, the Intel
®
SAS modules (RMS25JB080 and RMS25JB040)
can work as PCI Express* Gen2 x4 electrical and the Intel
®
ROC modules (RMS25CB080 and
RMS25CB040) cannot be detected.
To Next Page
Loading...
Need help?
General
