Intel S1200V3RP Technical Product Specification

Intel® Server Board S1200V3RP TPS On-board Connector/Header Overview
Revision 1.2
79
Pin
Signal Name
6
FM_LCP_LEFT_N
7
FM_LCP_RIGHT_N
8.3.5 HSBP_ I
2
C Header
Table 34. HSBP_ I
2
C Header Pin-out (J2K4)
Pin
Signal Name
1
SMB_HSBP_3V3STBY_DATA
2
GND
3
SMB_HSBP_3V3STBY_CLK
8.3.6 HDD LED Header
The server board includes a 2-pin hard drive activity LED header used with some SAS/SATA
controller add-in cards. The header has the following pin-out.
Table 35. HDD LED Header Pin-out (J1G2)
Pin
Signal Name
Pin
Signal Name
1
LED_HDD_ACT_N
2
N/A
8.3.7 Chassis Intrusion Header
The server board includes a 2-pin chassis intrusion header which can be used when the chassis
is configured with a chassis intrusion switch. The header has the following pin-out.
Table 36. Chassis Intrusion Header Pin-out (J1F1)
Header State
Description
Pins 1 and 2 closed
FM_INTRUDER_HDR_N is pulled HIGH. Chassis cover is closed.
Pins 1 and 2 open
FM_INTRUDER_HDR_N is pulled LOW. Chassis cover is removed.
8.3.8 SATA SGPIO Header
SGPIO uses a 5pin header, this is to incorporate a ground conductor as an SI improvement
over previous generation products and based on measurement data indicating add the ground
is strongly recommended. The 5pin connector will be consistent with other HSBPs, in this way
cable commonality is improved.
Table 37. SATA SGPIO Header Pin-out (J2K2)
Pin
Signal Name
1
SCLK
2
SLOAD
3
GND
4
SDATAOUT0
5
SDATAOUT1

Intel S1200V3RP Specifications

General

Brand	Intel
Model	S1200V3RP
Category	Server Board
Language	English